Status Lights (LEDs)

Status lights on the front of the BDU indicate the current status of the system and can help you identify problems quickly.

BDU Status Lights

During normal operation, all three lights should be lit green. The following tables explain what the different light conditions indicate. If an error or warning condition exists, view the error/warning message on the system's web interface (see Error and Warning Messages).

IMPORTANT! All three status lights will alternate orange whenever a software update is in progress. (Updates might take up to 30 minutes. Do not turn off the system during this time.) All three lights will blink green and orange for one minute when the BDU has been reset to its factory default settings (see Factory Reset).

HUB (or VSAT-HUB) Light

Light is...	Indicates	Description
Off	Off	BDU is powered off or no power input
Green	OK	Good input power; BDU is operational
Flashing Green	Initializing	BDU is starting up
Orange	Warning	Check web interface for warning message (see Error and Warning Messages)
Red	Error	Check web interface for error message (see Error and Warning Messages)

ANTENNA Light

Light is...	Indicates	Description
Off	Off	No power input to the antenna
Solid Green	OK	Antenna is operating normally
Orange	Warning	Check web interface for warning message (see Error and Warning Messages)
Red	Error	Check web interface for error message (see Error and Warning Messages)

ONLINE Light

Light is...	Indicates	Description
Off	Disconnected	Selected WAN is not connected
Green	Online	System is connected to the Internet
Orange	Offline	System is not connected to the Internet

Was this topic helpful? Please share your feedback.