LAN Settings

By default, the High-speed LAN has a gateway of 192.168.6.1 and assigns IP addresses in the 192.168.6.50-150 range. If this configuration conflicts with an existing onboard network, you may change the settings at the TracPhone V7-HTS web interface (see below). The Unlimited LAN (gateway 192.168.5.1) cannot be changed; if it conflicts with an existing network, please contact KVH Technical Support.

Important!

The default LAN settings work well for most installations. Do not change these settings unless absolutely necessary.

NOTE: If the optional CommBox software is enabled, the Network Settings page of the ICM will not contain any configurable fields.

To change the ICM’s High-speed LAN settings, follow these steps:

  1. At the TracPhone V7-HTS web interface, click the Settings tab. Then click Network Settings.

  2. In LAN Settings, click Edit.

  3. If the Login window appears, log in with the Administrator password.

  4. Modify the IP Address, Subnet Mask, and DHCP Mode settings as necessary.

  5. Click Save.

  6. At the confirmation message, click Save.

LAN Settings

HTS_LANsettings.png