Accessing the Router's Web Interface

At the web interface of the LTE system's built-in router, you can modify Wi-Fi settings (e.g., turn off Wi-Fi or change the SSID and password) and configure the network (e.g., change the IP address or turn off DHCP).

1. Connect to the LTE network. Ideally, connect a standard Ethernet cable from the Ethernet port on your computer to the LAN port on the LTE system's PoE injector. As an alternative, you could access the router's web interface via the built-in Wi-Fi. But you would immediately lose your connection upon modifying the Wi-Fi settings.
2. Start your web browser and enter https://192.168.55.1 to bring up the web interface.
3. Log in using the following credentials:

• Username: admin
• Password: TracPhoneLTE1

You can now make changes to the Built-in Wi-Fi Settings or Advanced Network Settings.

IMPORTANT! Do not change any settings other than those described in this Help tool. Changing other settings available in the web interface may disable the LTE system.