You can view the current status of the system’s no-transmit zones on the Home page of the TracPhone V11 web interface. If no-transmit zones have been set up, “My VSAT Status” includes a No-Transmit Zones column. If this column is missing, no transmit zones have not yet been set up or they have been cleared from memory. See Establishing No-Transmit Zones for details on setting up no-transmit zones.
No-Transmit Zones Status Information on Home Page
The No-Transmit Zones column will display one of the following status indications:
Transmit Enabled (green) – One or two no-transmit zones have been set up and are currently enforced. However, the antenna is not pointing within a no-transmit zone.
Transmit Disabled (orange) – One or two no-transmit zones have been set up and are currently enforced. The antenna is pointing within a no-transmit zone and will not transmit.
Transmit Enabled (red) – One or two no-transmit zones have been set up, but they are currently being ignored (see Disabling No-Transmit Zones). The antenna can transmit in any direction without restriction.
NOTE: You can also view the status of no-transmit zones on the CommBox-ACU’s front panel LCD (go to No-Transmit Zones).