The ICM includes four Ethernet ports and a built-in wireless access point (WAP) that can be configured in a variety of ways to meet your vessel’s needs.
Ethernet Ports and Wireless Access Point
Some of the most common configurations can be set up directly from the TracPhone V3-HTS web interface or the mini-VSAT Manager:
Option |
Description |
Standard |
Ports 1-4, Wi-Fi: High-speed LAN with unrestricted access |
Static IP |
Ports 1-3, Wi-Fi: High-speed LAN with unrestricted access Port 4: Accessory LAN (reserved for optional service such as Global Static IP) |
Access Control |
Ports 1-3, Wi-Fi: High-speed LAN with access control Port 4: Accessory LAN (reserved for optional service such as Global Static IP) |
If your vessel requires a custom configuration, please contact KVH Network Services at networkservices@kvh.com.
To select an ICM network configuration, follow these steps:
At the TracPhone V3-HTS web interface, click the Settings tab. Then click Network Settings.
NOTE: You can also change the ICM’s network configuration at the mini-VSAT Manager (www.mykvh.com). Go to the ICM > Network Configuration section of the Vessel Details page and select Configure Network.
In Network Configuration, click Edit.
Select an option from the Configuration drop-down menu. Then click Save.
Selecting a Network Configuration
At the confirmation message, click Save.
Follow the additional steps for your chosen configuration:
NOTE: Whenever you change the ICM’s network configuration, its built-in wireless access point (WAP) reverts to Off, its default setting.