The ICM includes four Ethernet ports and a built-in wireless access point (WAP) that can be configured in a variety of ways to meet your vessel’s needs.
Ethernet Ports and Wireless Access Point
Some of the most common configurations can be set up directly from the TracPhone V7-HTS web interface or the mini-VSAT Manager:
Option |
Description |
Standard HTS |
Port 1: Unlimited LAN Ports 2-4, Wi-Fi: High-speed LAN with access control |
Static IP HTS |
Port 1: Unlimited LAN Ports 2-3, Wi-Fi: High-speed LAN
with access control |
Open Access HTS |
Port 1: Unlimited LAN Ports 2-3, Wi-Fi: High-speed LAN
with unrestricted access |
If your vessel requires a custom configuration, please contact KVH Network Services at networkservices@kvh.com.
Important! |
The TracPhone V7-HTS system provides two separate data paths for Internet access:
It is important to understand these differences before you select your ICM network configuration. Also keep in mind that these are separate networks that must not be connected to each other. |
To select an ICM network configuration, follow these steps:
At the TracPhone V7-HTS web interface, click the Settings tab. Then click Network Settings.
NOTE: You can also change the ICM’s network configuration at the mini-VSAT Manager (www.mykvh.com). Go to the ICM > Network Configuration section of the Vessel Details page and select Configure Network.
In Network Configuration, click Edit.
Select an option from the Configuration drop-down menu. Then click Save.
Selecting a Network Configuration
At the confirmation message, click Save.
Follow the additional steps for your chosen configuration:
NOTE: Whenever you change the ICM’s network configuration, its built-in wireless access point (WAP) reverts to Off, its default setting.